Description
Set up this water trough in a yard, kennel or animal enclosure, then connect it to a compatible garden hose, tank or mains water line. The adjustable float valve controls the fill level, while the reversible 1/2-inch BSP inlet lets you choose the connection side that best suits the space.
This animal water trough holds approximately 4 litres and includes a brass garden hose fitting for a compatible connection. The removable cover helps limit direct access to the float assembly, while the drainage bung lets you empty the UV-stabilised nylon trough without lifting or tipping it.
Key Features
- Adjustable Automatic Float Valve
Controls incoming water as the bowl level changes. The float can be adjusted to set the preferred fill level. - Reversible 1/2-Inch BSP Inlet
Install the water inlet on either side of the bowl. This makes it easier to work around the position of an existing water line. - Three Water Connection Options
Connect the bowl to suitable mains water, a garden hose or a tank system. Operating pressure and gravity-feed requirements have not been supplied. - Brass Garden Hose Fitting Included
The supplied fitting allows connection to a compatible garden hose. No separate hose adaptor is required for this connection method. - Removable Float Protection Cover
The cover helps shield the float assembly from direct animal contact. Two screws can be removed when access is needed for inspection or adjustment. - Drainage Bung for Routine Emptying
Release water through the built-in drain instead of tipping the entire bowl. This supports easier cleaning and water changes. - UV-Stabilised Nylon Construction
Made from UV-stabilised nylon rather than standard polyethylene. The material is intended for use in outdoor animal areas. - Compact Four-Litre Bowl
Measures 27 28 12.5 cm with an approximate 4L capacity. Its compact footprint suits installations where space is limited.
Specifications
- Product Type: Automatic Animal Water Trough Bowl
- Capacity: Approximately 4 L
- Material: UV-Stabilised Nylon
- Float Type: Fully Adjustable Automatic Float
- Water Inlet: 1/2-Inch BSP
- Inlet Position: Either Side
- Connection Options: Mains Water, Garden Hose or Tank
- Included Fitting: Brass Garden Hose Fitting
- Float Cover: Removable, Secured by Two Screws
- Drainage: Removable Bung
- Dimensions: 27 28 12.5 cm
Ideal For
- Dog yards needing fewer manual refills
- Kennels with a connected water supply
- Animal pens needing controlled water levels
- Enclosures needing covered float components
- Watering areas needing easier bowl emptying
